akutester/soft/main.c

#include <avr/io.h>
#include <util/delay.h>
#include <avr/pgmspace.h>
#include <avr/eeprom.h>
#include "main.h"
#include "1wire.h"
#include "gtext.h"
#include "sed1335.h"
#include "ds18b20.h"
#include "dac8571.h"
#include "ads1224.h"

#include "display.h"

volatile struct timers timers;

volatile unsigned char tick; // incremented every 100ms

unsigned char getkey(void){
	static unsigned char old;
	unsigned char key;
	static unsigned char counter;
	DDRA = 0;
	PORTA = 0xff;
	DDRC |= _BV(PC7);
	_delay_ms(2);
	key = ~PINA;
	DDRC &= ~_BV(PC7);
	PORTA = 0;
	DDRA = 0xff;
	if(key == 0)
		counter = 0;
	if(key == old){
		switch(counter){
			default:
				counter++;
				return 0;
			case 5:
				counter++;
				break;
			case 8:
				break;
		}
	} else {
		counter = 0;
	}
	old = key;
	return key;
}

struct settings {
	float coeff_generator_volt_A;
	float coeff_generator_volt_B;
	float coeff_generator_curr_A;
	float coeff_generator_curr_B;
	float coeff_disch_curr_A;
	float coeff_disch_curr_B;
	float coeff_volt_A;
	float coeff_volt_B;
	float coeff_curr_A;
	float coeff_curr_B;
};

struct settings settings;
EEMEM struct settings eep_settings = {
	.coeff_generator_volt_A = 1597.035901,
	.coeff_generator_volt_B = 1317.235211,
	.coeff_generator_curr_A = 65535.0/20,
	.coeff_generator_curr_B = 1310,
	.coeff_disch_curr_A = 2996.00532623169,
	.coeff_disch_curr_B = 4298.2689747004,
	.coeff_volt_A = 1.55337778893448E-07,
	.coeff_volt_B = -0.092784032021951,
	.coeff_curr_A = -9.03353481586364E-08,
	.coeff_curr_B = 0.124868806047484,
//	.coeff_curr_A = .001,
//	.coeff_curr_B = 0,
};

unsigned int vdac = 0;
unsigned int cdac = 0;

void dac_update(void){
	dac8571_set(cdac, CURR_DAC);
	dac8571_set(vdac, VOLT_DAC);
}

void set_voltage(float u){
	vdac = u * settings.coeff_generator_volt_A + settings.coeff_generator_volt_B;
	dac_update();
}

void set_charge_curr(float i){
	cdac = i * settings.coeff_generator_curr_A + settings.coeff_generator_curr_B;
	dac_update();
}

void set_discharge_curr(float i){
	cdac = i * settings.coeff_disch_curr_A + settings.coeff_disch_curr_B;
	dac_update();
}

#define CONV_ENABLE _BV(PD5)
#define DISCH_ENABLE _BV(PD1)
#define REL_K1 _BV(PD6)
#define REL_K2 _BV(PD7)

#define K1_ON() {PORTD |= REL_K1;}
#define K1_OFF() {PORTD &= ~REL_K1;}
#define K2_ON() {PORTD |= REL_K2;}
#define K2_OFF() {PORTD &= ~REL_K2;}
#define POWER_OFF() {PORTD &= ~(CONV_ENABLE | DISCH_ENABLE);}
#define CONV_ON() {PORTD |= CONV_ENABLE;}
#define DISCH_ON() {PORTD |= DISCH_ENABLE;}

void output_off(void){
	cdac = 0;
	vdac = 0;
	POWER_OFF();
	dac_update();
	K1_OFF();
	K2_OFF();
}

void charge_on(void){
	output_off();
	K1_ON();
	CONV_ON();
}

void discharge_on(void){
	output_off();
	K2_ON();
	DISCH_ON();
}

#define MEAS_VOLT	0
#define MEAS_CURR	1

float meas[2];
signed long int adc_results[2];

unsigned char adc_process_data(void){
	static unsigned char adc_channel = AIN1;
	static signed long int adc;
	if(adc_data_ready){
		atomic_set_slint(&adc, adc_val);
		switch(adc_channel){
			case AIN1:
				adc_results[MEAS_VOLT] = adc;
				meas[MEAS_VOLT] = adc * settings.coeff_volt_A + settings.coeff_volt_B;
				adc_channel = AIN2;
				ads1224_mux(AIN2);
				break;
			case AIN2: default:
				adc_results[MEAS_CURR] = adc;
				meas[MEAS_CURR] = adc * settings.coeff_curr_A + settings.coeff_curr_B;
				adc_channel = AIN1;
				ads1224_mux(AIN1);
				break;
		}
		adc_data_ready = 0;
		return 1;
	}
	return 0;
}

__flash const char text0[] = "stop";
__flash const char text1[] = "\x80""aduj";
__flash const char text2[] = "roz\x80""aduj";
__flash const char text3[] = "reset";
__flash const char text4[] = "Uset(charg) = ";
__flash const char text5[] = "Uset(disch) = ";
__flash const char text6[] = "Iset = ";

__flash const char *main_menu_texts[] = {
	text0,
	text1,
	text2,
	text3,
	text4,
	text5,
	text6,
};

#define MENU_MAX 6

#define MODE_STOP	0
#define MODE_CHARGE	1
#define MODE_DISCHARGE	2

void main(void){
	unsigned char i=0;
	unsigned char pos=0;
	unsigned char k;
	unsigned char mode = MODE_STOP;
	unsigned int volt_set = 365, disch_volt_set = 210, curr_set = 30; // *0,01V, *0,01V, *0,1A
	signed long long int charge_counter = 0, energy_counter = 0; // *0,1µC, *10µJ
	unsigned long int time_counter = 0; // *0,1s
/*	unsigned char state = STATE_DEFAULT;
	unsigned char oldstate = state;*/
	
	eeprom_read_block(&settings, &eep_settings, sizeof(struct settings));
	
	
	// system timer
	OCR2A = (125-1); // 1ms
	TCCR2A = _BV(WGM21);
	TCCR2B = _BV(CS22);
	TIMSK2 = _BV(OCIE2A);
	
	
	// fan pwm timer
	ICR1 = (330-1); // 25kHz
	OCR1B = 40;
	TCCR1A = _BV(COM1B1) | _BV(WGM11);
	TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10);
	TCCR1C = 0;
	DDRD |= _BV(PD4);
	
	sei();

	PORTC &= _BV(PC7);	// KEY
	DDRB |= _BV(PB2);	// TESTPOINT
	
	DDRD |= REL_K1 | REL_K2 | DISCH_ENABLE | CONV_ENABLE;
	
	GLCD_Initialize();
	GLCD_Clear();
	
	ads1224_init();
	ads1224_mux(AIN1);
	
/*	charge_on();
	set_voltage(volt_set);
	set_charge_curr(curr_set);*/

	for(;;){
		dac_update();
		adc_process_data();
		gettemp();

		cursor(0, 7);
		puttext_P(PSTR("Temp: "));
		if(temp_ok & _BV(0)){
			disp_temp(temps[0]);
			if(temps[0] < 350){
				atomic_set_uint(&OCR1B, 0);
			} else if(temps[0] < 900){
				atomic_set_uint(&OCR1B, (unsigned long int)((temps[0] - 300)*(unsigned long int)(0.506*32.0))>>5);
			} else {
				atomic_set_uint(&OCR1B, 329);
			}
		} else {
			atomic_set_uint(&OCR1B, 329);
			puttext_P(PSTR("B\x80\x7e""d"));
		}
		clearline();

		for(i=0; i<=MENU_MAX; i++){
			cursor(0, i);
			if(pos == i)
				putchar('*');
			else
				putchar(' ');
			putchar(' ');
			puttext_P(main_menu_texts[i]);
			putchar(' ');
			switch(i){
				default: break;
				case 1: if(mode == MODE_CHARGE) puttext_P(PSTR("w\x80.")); break;
				case 2: if(mode == MODE_DISCHARGE) puttext_P(PSTR("w\x80.")); break;
				case 4: disp_num(volt_set, 2); putchar('V'); break;
				case 5: disp_num(disch_volt_set, 2); putchar('V'); break;
				case 6: disp_num(curr_set, 1); putchar('A'); break;
			}
			clearline();
		}
		k = getkey();
		switch(k){
			default: break;
			case KEY_UP: if(pos>0) pos--; break;
			case KEY_DOWN: if(pos<MENU_MAX) pos++; break;
			case KEY_LEFT:
				switch(pos){
					case 4:
						if(mode != MODE_STOP)
							break;
						if(volt_set > 0)
							volt_set -= 5;
						break;
					case 5:
						if(mode != MODE_STOP)
							break;
						if(disch_volt_set > 0)
							disch_volt_set -= 5;
						break;
					case 6:
						if(mode != MODE_STOP)
							break;
						if(curr_set > 0)
							curr_set -= 1;
						break;
				}
				break;			
			case KEY_RIGHT:
				switch(pos){
					case 4:
						if(mode != MODE_STOP)
							break;
						if(volt_set < 3000) // 30V
							volt_set += 5;
						break;
					case 5:
						if(mode != MODE_STOP)
							break;
						if(disch_volt_set < 3000) // 30V
							disch_volt_set += 5;
						break;
					case 6:
						if(mode != MODE_STOP)
							break;
						if(curr_set < 200)
							curr_set += 1; // 10A
						break;
				}
				break;
			case KEY_OK:
				switch(pos){
					case 0:
						mode = MODE_STOP;
						output_off();
						break;
					case 1:
						if(mode != MODE_STOP)
							break;
						mode = MODE_CHARGE;
						charge_on();
						set_voltage((float)volt_set/100.0);
						set_charge_curr((float)curr_set/10.0);
						break;
					case 2:
						if(mode != MODE_STOP)
							break;
						mode = MODE_DISCHARGE;
						discharge_on();
						set_discharge_curr((float)curr_set/10.0);
						break;
					case 3:
						if(mode != MODE_STOP)
							break;
						charge_counter = 0;
						energy_counter = 0;
						time_counter = 0;
						break;
				}
				break;
		}
		
		if(tick){
			cli();
			if(mode != MODE_STOP){
				charge_counter += meas[MEAS_CURR] * (float)tick / (float)(10.0 * 0.1e-6);
				energy_counter += meas[MEAS_CURR] * meas[MEAS_VOLT] * (float)tick / (float)(10.0 * 10e-6);
				time_counter += tick;
			}
			tick = 0;
			sei();
			
			if(mode == MODE_DISCHARGE && meas[MEAS_VOLT] < (float)disch_volt_set/100.0){
				mode = MODE_STOP;
				output_off();
			}
			
			cursor(0,8);
			disp_num(meas[MEAS_VOLT] * 1000, 3);
			putchar('V');
			putchar(' ');
			disp_num(meas[MEAS_CURR] * 1000, 3);
			putchar('A');
			putchar(' ');
			disp_num(meas[MEAS_CURR] * meas[MEAS_VOLT] * 10, 1);
			putchar('W');
			clearline();
			cursor(0,9);
			disp_num((float)charge_counter * (float)(0.1e-6 * 10000.0 / 3600.0), 4);
			puttext_P(PSTR("Ah "));
			disp_num((float)energy_counter * (float)(10e-6 * 10000.0 / 3600.0), 4);
			puttext_P(PSTR("Wh "));
			disp_num(time_counter, 1);
			puttext_P(PSTR("s"));
			clearline();
		}
	}
}

ISR(TIMER2_COMPA_vect){ // 1ms
	unsigned int *volatile ctimer;
	unsigned char i;
	
	for(i=0; i<sizeof(timers)/sizeof(unsigned int); i++){ // decrement every variable from timers struct unless it's already zero
		ctimer = ((unsigned int *)&timers) + i;
		if(*ctimer)
			(*ctimer)--;
	}
	
	if(timers.tick == 0){
		tick++; // 100ms
		timers.tick = 100;
	}
}